Application field of titanium rod filter

Titanium rod filter is made of 304 or 316L high-quality stainless steel, internal and external mirror polished, produced in accordance with GMP standards, and can be jacketed for high temperature filtration. The filter element adopts titanium rod filter, which is resistant to high temperature, high pressure, strong acid, and strong alkali corrosion. The filter element can be reused repeatedly and is widely used in liquid-solid separation in food and beverage, biomedicine, chemical, electronics, biochemical water treatment and other industries. In the pharmaceutical industry, it is especially suitable for decarbonization and filtration in large infusion and injection production lines.

Titanium rod filter has a variety of structural forms, flip type: convenient slag discharge, no residue of filtrate; hoisting type: suitable for high solid content, simple structure, convenient regeneration operation; cartridge type: suitable for less solid content, no Filtration of residual liquid and precious products.

　　Titanium rod filter principle

When the filter medium enters the filter cartridge from the liquid inlet, the impurities are first intercepted by the surface of the titanium rod, and a dense filter layer with gaps is formed on the surface of the titanium rod. This filter cake layer can also filter. At the same time, the size ratio The particles with small pore diameter of the titanium rod enter the micropores on the wall of the titanium rod. Because the tube wall has countless curved pores, the pores are intricately curved and slender, and the particles are easily intercepted after entering, and because the fluid flows through. The squeezing and impact caused by the particles are tightly attached to the wall of the channel. This filtering is carried out inside the titanium rod, which belongs to deep filtration. Impurities are intercepted on the outer surface of the titanium rod and the inner wall of the titanium rod, and the filter is clean The material flows out from the water outlet. When the impurities in the filter cartridge accumulate, the pressure on the filter becomes larger and larger. When it reaches 0.3MPa, the filter titanium rod needs to be regenerated.

  Features:

　　Titanium rod filter has high filtration accuracy, which can filter out particles above 0.2 microns at a time

　　■ High temperature resistance, good chemical stability, acid and alkali corrosion resistance PH2-12 has anti-oxidation performance

　　■ High porosity, low filtration resistance, pressure filtration or suction filtration, liquid and solid phase recovery can be completed

　　■ No medium shedding, no pollution, in line with GMP and FDA certification requirements

　　■ It can be filtered online, easy to clean, and has a long service life (generally several times the membrane filter element)

　　 Application field of titanium rod filter

　　 Titanium rod filter with its unique performance can be widely used in the pharmaceutical industry, water treatment industry, food industry, bioengineering, chemical industry, petrochemical industry,

　　 Metallurgical industry and gas purification field. It is a new material with broad development prospects. Its typical uses include:

　　1. In the pharmaceutical industry, large infusion, small injections, eye drops, and oral liquids are decarbonized filtration in the concentrated preparation process and security filtration before terminal filtration in the dilute preparation process.

　　2, the impurity removal filtration, decarburization filtration and fine filtration of materials in the production process of APIs.

　　3. Ultrafiltration, RO, EDI system security filtration in the water treatment industry, filtration after ozone sterilization and ozone aeration.

　　4. Clarification and filtration of beverages, liquor, beer, vegetable oil, mineral water, soy sauce, and vinegar in food and beverages.

5. Decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultra-fine refined bodies and catalysts, precision filtration after resin adsorption, and system heat transfer oil and material removal filtration, catalysis Air purification, etc.

　　6. Oil field return water filtration, security filtration before reverse osmosis in the field of seawater desalination.

　　7. High-temperature decarbonization and de-white clay filtration in the dye industry.

　　 8. Steam, compressed air, and catalyst filtration for gas purification.